Back to BlogGuides

Made a Mistake Writing a Check? Here's What to Do

If you catch a mistake before you've handed the check over, void it and write a new one. Don't cross out and fix a check with a pen. If the check's already with the payee or already cashed, the fix depends on timing: you may need to ask for the check back, contact your bank about a stop payment, or wait and correct your records once it clears. Either way, log the error in your checkbook register so your balance stays accurate.

Check-writing mistakes are common: wrong amount, wrong date, a misspelled name. Most are easy to fix if you catch them early. The tricky part is knowing which stage you're at, since what you should do changes depending on whether the check has been signed, handed over, or already deposited. Below is a walkthrough for each situation, plus how to keep your checkbook register accurate once the dust settles.

Why You Generally Shouldn't Cross Out and Reuse a Check

It's tempting to just cross out a wrong number or name and write the correct one next to it. In practice, this creates two problems. First, a check with visible alterations, especially to the dollar amount, can be flagged or rejected by a bank, since altered numbers are one of the things tellers and processing systems are trained to watch for as a fraud signal.

Second, even if it's accepted, a sloppy correction makes it harder to prove what the check was actually for if a dispute ever comes up. The safer, simpler habit: if you haven't handed the check to anyone yet, void it and start fresh.

Mistake Caught Before You Sign

This is the easiest case. If you notice an error on the payee line, amount, or date before you've signed the check, just void it and write a new one. There's no need to explain anything to anyone, and no risk of the check being used, since it isn't valid without a signature. Write "VOID" across the front in pen and keep it with your records instead of throwing it away. More on that below.

Mistake Caught After Signing, Before Handing It Over

Once you've signed the check but haven't handed it to the payee yet, it's technically valid, which makes it more important to void it properly rather than just tearing it up and forgetting about it. Write "VOID" clearly across the front, in an area that covers the signature line and amount boxes, and record it as voided in your register.

Keep the physical check or shred it, whichever you prefer, but either way make sure the transaction is logged so your check number sequence and balance stay consistent. For a closer look at when and how voiding applies, see How to Void a Check (And When You Actually Need To).

Check Already Given to the Payee

Once the check has left your hands, your options narrow. If the payee hasn't deposited it yet, the simplest fix is usually to ask them to return the check or destroy it, then issue a corrected one in its place. This works well for minor, non-sensitive errors, like a wrong date, where you're on good terms with the payee and there's no urgency on their end.

Can't get the check back? Maybe it's lost, the payee's already deposited it, or there's a dispute. In that case, you may need to contact your bank about a stop payment order before the check clears. A stop payment generally comes with a fee and only works if the check hasn't already been processed, so timing matters. For the specifics on how that process works, see How to Stop Payment on a Check: 4 Steps.

Check Already Deposited or Cashed

Sometimes the check has already been deposited or cashed with an error on it, say the amount was slightly off, or a digit got transposed. In that case, your first call should be to your bank, and likely the payee as well. Depending on the type of error, the bank may be able to reverse or correct the transaction, but this isn't guaranteed and varies by institution and the kind of mistake.

Should the error cause you to overdraw your account or bounce another payment, it's worth understanding what typically happens next. See What Happens If a Check Bounces? Fees, Risks & Fixes. Either way, update your own register right away so your records reflect what actually happened, not what you meant to write.

How to Properly Void a Paper Check

Here's the quick version, step by step:

  1. Write "VOID" in large letters across the front of the check, ideally through the signature line, amount box, and payee line.
  2. Don't cut out the signature or account numbers. Leave the check intact so you still have a full record.
  3. Keep the voided check in a dedicated folder or envelope with your other check records, rather than discarding it right away.
  4. Record the check number as "Void" in your checkbook register, with a short note on why, so the running balance and check sequence both stay correct.
  5. If it was ordered or printed through an app, void and log the entry there too, so the digital register matches your paper records.

When a Correction With Initials Might Be Accepted

Some people correct a minor error, like a transposed date, by neatly crossing out the mistake, writing the correct information above it, and initialing next to the change. Banks don't all treat this the same way: some will accept a clean, clearly initialed correction on a minor field like the date, while others reject any altered check outright, particularly if the dollar amount is involved.

Because there's no universal rule here, the safest approach is to check with your own bank before relying on this method, and to default to voiding and rewriting whenever the amount, payee name, or signature is affected.

Common Mistakes and the Right Fix for Each

A few of the most common slip-ups, and the right way to handle each:

  • Numeric amount and written-out amount don't match: banks typically go by the written words, but a mismatch is a common reason checks get flagged or returned, so void and rewrite rather than trying to fix one side.
  • Misspelled payee name: minor misspellings sometimes clear fine, but anything that could cause confusion about who the check is payable to should be corrected with a new check.
  • Wrong date: a close date usually isn't a problem, but if the date is wrong enough to matter (for example, postdating by accident), it's safer to void and rewrite than to cross it out.
  • Missing signature: an unsigned check simply isn't valid. The bank will reject it, so there's no need to void it, just sign it or write a new one if it's already been submitted without a signature.

How to Record a Voided Check in Your Register

Whether you keep a paper register or a digital one, the goal is the same: the voided check shouldn't disappear from your records, and it shouldn't throw off your running balance. In a paper register, write the check number, mark it "Void" in the description, and enter $0.00 so the balance carries forward unaffected. In a digital register, the process is similar. Record the transaction, mark it as void, and let the app recalculate the balance automatically rather than editing the math by hand.

This matters, since an unrecorded voided check can make your check numbers look out of sequence later, which can cause confusion when reconciling against a bank statement. If you want a broader rundown of what else tends to throw off a register, see 7 Common Checkbook Register Mistakes (And How to Fix Them).

Preventing These Mistakes Going Forward

Most check errors come down to the same handful of causes: rushing through the amount line, writing the number and the words separately without checking they match, or filling in the date on autopilot. Slowing down for the thirty seconds it takes to re-read a check before signing it catches most mistakes before they cost you anything.

If you write checks regularly, it also helps to have a system that does some of that double-checking for you and keeps a clear history of anything you've corrected, rather than relying on memory or a crossed-out paper trail. For more on the mechanics of filling one out correctly the first time, see How to Write a Check: Step-by-Step Guide.

FAQ

Can I just cross out a mistake and keep writing the same check?

You can, but it's risky for anything involving the dollar amount, payee name, or signature, since an altered check can be rejected by the bank. Minor corrections like the date are sometimes accepted if neatly crossed out and initialed, but policies vary by bank, so it's worth asking yours before counting on it. Voiding and writing a new check is the more reliable option.

What should I do with a check after I void it?

Keep it rather than throwing it away. Write "VOID" clearly across the front, covering the signature and amount, and file it with your other check records. Also log it in your checkbook register so the check number and balance stay accurate.

I already handed the payee a check with the wrong amount — what now?

If the check hasn't been deposited yet, ask the payee to return or destroy it and give them a corrected one. If you can't get it back or it's already been deposited, contact your bank to ask about a stop payment or correction, and update your register as soon as you know how it was resolved.

Does a voided check still count as a used check number?

Yes. Even though it was never deposited, the check number was used, so it should still appear in your register marked as void rather than being skipped. This keeps your numbering sequence and balance consistent when you reconcile against a bank statement.

If you write checks often, QuickCheck's checkbook register includes void-and-edit tracking with transaction history, so a mistake like this is logged clearly instead of becoming a crossed-out mess. Download QuickCheck for free on iOS and Android to write, print, and track every check from your phone — with a built-in checkbook register that balances itself.